AIMS 4000 Watt Pure Sine Inverter Charger 12 Volt | PICOGLF40W12V120V + Free Shipping & NO Sales Tax

One of the most popular features about the AIMS 4000 watt pure sine inverter is the direct connect terminal block which allows a 300 percent surge capacity for up to 20 seconds. Plus the fact that when using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers.

However, If you’re looking for an inverter with similar capabilities but a lower wattage capacity, you may want to check out the 2000 watt low frequency AIMS Power inverter charger.

Three Products In One

1. The inverter transforms DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to power tools and appliances of all varieties.
2. A built-in 40 amp automatic transfer switch allows the product to automatically switch from using a battery bank to shore power. This is great in the event of a power outage, as the product will automatically detect the outage and redirect power from your backup battery bank.
3. It also has a built-in 100 amp battery charger which uses AC power, from the grid or from a fuel-powered generator for example, that can be used to recharge a battery bank as well. The battery-type selector on the top of the unit allows the ability to adjust the voltage provided to the bank.

In the event of a power outage, this inverter combined with a battery bank can be used to power a few lights, a refrigerator and perhaps a few other necessities. 

Features:

• 4000 watt low frequency inverter
• 12000 watt surge for 20 seconds 300% surge capability
• Battery priority selector
• AC direct connect terminal bock for hardwire
• Marine coated and protected
• Multi stage smart charger 100 Amp
• Charges lithium LiFePO4, GEL, AGM and lead batteries. We recommend to check battery charging specifications for all batteries.
• Remote panel available
• Auto frequency
• 10msec typical transfer time
• Selectable 25W power save mode (hibernation)
• 7 battery type settings for charger
• Automatic transfer switch

Inverter Output Specifications:

• Continuous Output Power: 4000 Watts
• Surge Rating: 12000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Nominal Efficiency: >88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: < 10% DC
• Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications

• Nominal Input Voltage: 12.0Vdc
• Minimum Start Voltage: 10.0Vdc
• Low Battery Alarm: 10.5Vdc-11.0Vdc
• Low Battery Trip: 10.0Vdc-10.5Vdc
• High Voltage Shutdown: 16.0Vdc
• Low Battery Voltage Restart: 13.3Vdc
• Idle Consumption: <3.47 amps DC
• Power Saver Mode Idle Consumption: <0.53 amps DC

Charger Specifications:

• Output voltage: depends on battery type
• Charger rate: 115A
• Over charge protection shutdown 15.7V
• Selectable charge setting based on battery type
• Adjustable charge current: off-20%-100%
• Four stage smart charger

Transfer Switch Specifications:

• 40 amp automatic transfer switch
• 10 ms (max)

Dimensions: 

• Unit Weight: 64 lbs.
• Unit Size L x W x H: 23.5 x 8.75 x 7.10 inches
• Shipping Weight: 75 lbs.
• Shipping L x W x H 30.5 x 14.25 x 13.75inches