As Described
Works as advertised. Haven’t hooked up the solar panels to it yet as it is for emergency use.
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
"Bring Your Own Panels" solar ready kits include everything you need to get hooked up with a useable, stand-alone battery based power system. Your kit includes a reliable, split phase (120/240V) output inverter along with all the parts and pieces needed to hook it up to your lithium iron phosphate battery bank, which is covered by a 10-Year Warranty.
Wether you already have solar panels, or would like to source these yourself locally, our BYOP kits come ready to easily connect to almost any type of solar panel array. This kit does NOT include solar panels, however you can connect up to 8KW of solar panels to this system.
Great question! You can charge your batteries through the inverter/charger three main ways:
1. Source some solar panels and/or wind turbine (DC power) and connect them to the system.
2. Using grid power if available by plugging your system right into the grid so that if your battery gets low, you can charge it back up from the grid (just like charging a cell phone battery).
3. You can connect and use a fuel powered generator to recharge your battery bank.
These inverters require a battery to operate and turn on. (Will not turn on via AC power or Solar Power without a battery). Inverter and dual charge controller, capable of parallel operation of up to 3 units (6 kW each) to 18 kW.
This item replaces the very popular and now discontinued LV5048
These inverters require a battery to operate and turn on. (Will not turn on via AC power or Solar Power without a battery). Inverter and dual charge controller, capable of parallel operation of up to 3 units (6 kW each) to 18 kW.
1 ) Dual Internal Pure sine wave Configurable Inverter - Configured as single phase 6kW at 120V - (0 Degree Phase shift, Output L1 and L2 connected together)
2) 6kW Split phase inverter 120V – 0 V – 120V (240V between L1 and L2) (180 Degree Phase shift between L1 and L2)
3) a two phase 208V inverter ( 120 Degree Phase Shift between L1 and L2 )
4) With three inverters, a three phase ( L1 , L2 and L3 being 120 Degrees apart, as in three phase systems)
5) Dual 4 kW Solar charge controllers per unit (8 kW in total)
6) 60A Utility Battery Charger (Will automatically charge your battery from Utility power in the event of low battery voltage – remember not 60A from Utility – 60 A to Battery, 60A x 48V = 2.8kW = 23A at 120V input)
7) Internal Transfer Relay, will switch your load to Utility power if your battery Voltage drops below a user setpoint voltage.
8) Can operate as a stand along UPS system (does not require solar panel input) Will switch your load over to battery power in the event of power failure
9) Has programmable dry contact relay, can be triggered on a programmable range of battery voltages and levels (can be used to start a generator, or an alarm or whatever you choose to do with it)
10) Grid Assist mode, in two ways, will switch your load over to Utility in the event of overload, or will supplement Solar and battery from Utility.
Each 6kW unit consists of 2 x 4kW Solar Chargers – Capable of supporting a total Solar array of 8kW, of a voltage range between 60 to 110V DC, MAX DC voltage is 145V
a 12kW system (2 units) is capable of supporting a 16 kW solar array in 4 circuits of 4kW
a 18kW system (3 units) is can support 24 kW solar array in 6 circuits of 4 kW
This unit can be programmed in a variety of ways, single phase, two phase (3 phase minus one phase) and split phase (120V -0V – 120V) as found in traditional North American Homes.
With a 180Ah at 48V (9.6kWh or 9,600 watt hours) this powerful battery is by far one of the best and most cost-efficient batteries in its class and on the market today! Capable of being connected in parallel with up to 8 total powerwalls, you can easily build a 18kwh+ 48V battery bank with just two of these units.
Our 48V GRIZ Powerwall comes with pre-installed Anderson connections making it ready to go for quick installation to any inverter, charge controller or bus bar. With the SB175 Anderson to ring terminal cable already included, you'll be up and running in no time!
BMS Specs
Battery Size
*This pack connects via Anderson Quick-Connect SB175 Cables.
Shipping Times | Estimated delivery time to your door for in-stock orders placed today is 5-10 business days. |
Shipments & Lead Times:
We process all orders within 72 hours. From there, we do our best to ship as quickly as possible. Shipping times vary depending on the product and size of your order. We will send you your tracking information to the e-mail and/or phone number on file.
With the incredible demand for solar products, our average delivery time to your door is between 7-10 business days from date of order. However, for some products, shipping can be as fast as 3-5 business days to your door. Please check specific product pages for the most accurate information.
*Please Note* - As a large retailer, our stock levels are healthy and shipments are moving quickly. If you place an order for something that is not in stock, or is on backorder, our team will reach out to you within 24-72 hours of placing your order to determine how you would like to move forward.
If you have any questions, give us a call at 877-242-2792 or reach out via email / live chat.
Quality |
Rated 4 out of 5
|
Easy to Use |
Rated 4 out of 5
|
Works as advertised. Haven’t hooked up the solar panels to it yet as it is for emergency use.
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Very Convenient to plug and play
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
I would prefer a third, but these two do everything I want. Only about 20 cycles in, but going strong. Easy to install and the bms is all internal and very simple. It does require attention, as they don't drain equally.
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
We’re very happy with the Griz by Big Battery! We bought two of them and both of them are awesome powerhouses! They charge quickly and their power lasts plenty long. The shipping was great! Very well packaged and shipped quick! Thank you Shop Solar Kits! You guys are awesome!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Shopsolarkits set me up with a customized WHK3. We doubled the panels, doubled the inverters and doubled the batteries! The only parts I’m waiting on is stuff I didn’t purchase thru SSK! Love the fast response time to questions after the sale.
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
"Bring Your Own Panels" solar ready kits include everything you need to get hooked up with a useable, stand-alone battery based power system. Your kit includes a reliable, split phase (120/240V) output inverter along with all the parts and pieces needed to hook it up to your lithium iron phosphate battery bank, which is covered by a 10-Year Warranty.
Wether you already have solar panels, or would like to source these yourself locally, our BYOP kits come ready to easily connect to almost any type of solar panel array. This kit does NOT include solar panels, however you can connect up to 8KW of solar panels to this system.
Great question! You can charge your batteries through the inverter/charger three main ways:
1. Source some solar panels and/or wind turbine (DC power) and connect them to the system.
2. Using grid power if available by plugging your system right into the grid so that if your battery gets low, you can charge it back up from the grid (just like charging a cell phone battery).
3. You can connect and use a fuel powered generator to recharge your battery bank.
These inverters require a battery to operate and turn on. (Will not turn on via AC power or Solar Power without a battery). Inverter and dual charge controller, capable of parallel operation of up to 3 units (6 kW each) to 18 kW.
This item replaces the very popular and now discontinued LV5048
These inverters require a battery to operate and turn on. (Will not turn on via AC power or Solar Power without a battery). Inverter and dual charge controller, capable of parallel operation of up to 3 units (6 kW each) to 18 kW.
1 ) Dual Internal Pure sine wave Configurable Inverter - Configured as single phase 6kW at 120V - (0 Degree Phase shift, Output L1 and L2 connected together)
2) 6kW Split phase inverter 120V – 0 V – 120V (240V between L1 and L2) (180 Degree Phase shift between L1 and L2)
3) a two phase 208V inverter ( 120 Degree Phase Shift between L1 and L2 )
4) With three inverters, a three phase ( L1 , L2 and L3 being 120 Degrees apart, as in three phase systems)
5) Dual 4 kW Solar charge controllers per unit (8 kW in total)
6) 60A Utility Battery Charger (Will automatically charge your battery from Utility power in the event of low battery voltage – remember not 60A from Utility – 60 A to Battery, 60A x 48V = 2.8kW = 23A at 120V input)
7) Internal Transfer Relay, will switch your load to Utility power if your battery Voltage drops below a user setpoint voltage.
8) Can operate as a stand along UPS system (does not require solar panel input) Will switch your load over to battery power in the event of power failure
9) Has programmable dry contact relay, can be triggered on a programmable range of battery voltages and levels (can be used to start a generator, or an alarm or whatever you choose to do with it)
10) Grid Assist mode, in two ways, will switch your load over to Utility in the event of overload, or will supplement Solar and battery from Utility.
Each 6kW unit consists of 2 x 4kW Solar Chargers – Capable of supporting a total Solar array of 8kW, of a voltage range between 60 to 110V DC, MAX DC voltage is 145V
a 12kW system (2 units) is capable of supporting a 16 kW solar array in 4 circuits of 4kW
a 18kW system (3 units) is can support 24 kW solar array in 6 circuits of 4 kW
This unit can be programmed in a variety of ways, single phase, two phase (3 phase minus one phase) and split phase (120V -0V – 120V) as found in traditional North American Homes.
With a 180Ah at 48V (9.6kWh or 9,600 watt hours) this powerful battery is by far one of the best and most cost-efficient batteries in its class and on the market today! Capable of being connected in parallel with up to 8 total powerwalls, you can easily build a 18kwh+ 48V battery bank with just two of these units.
Our 48V GRIZ Powerwall comes with pre-installed Anderson connections making it ready to go for quick installation to any inverter, charge controller or bus bar. With the SB175 Anderson to ring terminal cable already included, you'll be up and running in no time!
BMS Specs
Battery Size
*This pack connects via Anderson Quick-Connect SB175 Cables.
Shipping Times | Estimated delivery time to your door for in-stock orders placed today is 5-10 business days. |
Shipments & Lead Times:
We process all orders within 72 hours. From there, we do our best to ship as quickly as possible. Shipping times vary depending on the product and size of your order. We will send you your tracking information to the e-mail and/or phone number on file.
With the incredible demand for solar products, our average delivery time to your door is between 7-10 business days from date of order. However, for some products, shipping can be as fast as 3-5 business days to your door. Please check specific product pages for the most accurate information.
*Please Note* - As a large retailer, our stock levels are healthy and shipments are moving quickly. If you place an order for something that is not in stock, or is on backorder, our team will reach out to you within 24-72 hours of placing your order to determine how you would like to move forward.
If you have any questions, give us a call at 877-242-2792 or reach out via email / live chat.
Quality |
Rated 4 out of 5
|
Easy to Use |
Rated 4 out of 5
|
Works as advertised. Haven’t hooked up the solar panels to it yet as it is for emergency use.
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Very Convenient to plug and play
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
I would prefer a third, but these two do everything I want. Only about 20 cycles in, but going strong. Easy to install and the bms is all internal and very simple. It does require attention, as they don't drain equally.
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
We’re very happy with the Griz by Big Battery! We bought two of them and both of them are awesome powerhouses! They charge quickly and their power lasts plenty long. The shipping was great! Very well packaged and shipped quick! Thank you Shop Solar Kits! You guys are awesome!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Shopsolarkits set me up with a customized WHK3. We doubled the panels, doubled the inverters and doubled the batteries! The only parts I’m waiting on is stuff I didn’t purchase thru SSK! Love the fast response time to questions after the sale.
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Select Cable Length (Ft.)
Power Station Model:
Type of Solar Panels:
Choose Panel Wattage (Minimum Order Quantity 6+):
Select Cable Length (Ft.)
Power Station Model:
Type of Solar Panels:
Choose Panel Wattage (Minimum Order Quantity 6+):