- Solar Inverter: 6.5KW DC 48V pure sine wave AC output 120V, Built-in MPPT solar charger max 120A and utility battery charger max 120A, Max PV input 390V (Voc) ,Dual PV input. ETL Listed to UL 1741 / CSA/ FCC
- Parallel Kit: parallel support up to 6 units, 120V single phase (1 unit ),120V/240V Split Phase capable (2 unit parallel),208V 3-Phase Support (3 unit parallel)
- WIFI Model : Built-in WIFI transmitter,Enable inverter data to be transmitted via WIFI to user's iphone or android smartphone, app can be downloaded from apple or android store
- Batteryless support: the inverter can power the loads from PV array / ac grid without battery connected
- LCD operation: Detachable LCD control module with multiple communication ports for BMS (RS485, CAN-BUS, RS232)
Main Features:
- 6500W Pure Sine Wave 120V Output
- Parallel up to 6 units (built-in parallel kits)
- 120V/240V Split Phase capable (2 unit parallel)
- 208V 3-Phase Support (3 unit parallel)
- Max solar charging 120A MPPT and AC charging 120A
- Built-in Wi-Fi for mobile monitoring
- Work with 48V Lead-acid/Lithium/User-defined/Batteryless
- Pylontech/Weco/Soltaro BMS Support
- Built-in genset starter dry contact
- FREE monitoring software
- ETL Listed to UL 1741/CSA/FCC
WiFi Monitoring
Built in WIFI transmitter is available on the SP6548 inverters allowing user quick and easy access to inverter data on mobile phone. Download app from Apple or Android store.
Support USB On-The-Go Function
It supports USB On-The-Go function to facilitate data upload/download.
User-friendly LCD Operation
Users can easily set up or change the charging current, output source and charger source prioritization through LCD control panel to optimize inverter performance.
Parallel Support
This model supports parallel operation up to 6 units, in Single Phase, Split Phase, or 3 Phase configuration, Parallel kits are built-in.
Batteryless Support
This model allows batteryless operation and therefore battery is optional. PV or grid alone to power load is now possible, if desired.
Specifications
- Model: BluePower SP6548
- Rated Power: 6500W
- Parallel: Yes, 6 units
Input
- Voltage: 120V
- Selectable Voltage Range: 90-140 VAC/80-140 VAC
- Frequency Range: 50/60HZ (Auto-Sensing)
Output
- AC Voltage Regulation: 120V AC +- 5%
- Surge Power: 12000VA
- Efficiency: 93%
- Transfer time: 20ms
- Perform: Pure Sine Wave
- Idle Power Consumption: < 70W
Battery
- Battery Voltage: 48V DC
- Low DC Cut-off Voltage: Self-defined from 42-48Vdc
- Bulk Charging Voltage: Self-defined from 48V-62V
- Overcharge Protection: 66 VDC
Solar Charger & AC Charger
- Solar Charger Type: MPPT
- Maximum PV Array Power: 8000W (2 x 4000W)
- MPTT Operation Voltage: 90-350VDC
- Maximum PV Array Open Circuit Voltage: 390VDC
- Maximum Solar Charge Current: 120A
- Maximum AC Charge Current: 120A
- Maximum Charge Current: 120A
Physical
- Size D X W X H (inch): 5.91 x 16.93 x 23.62
- Net Weight (lb): 43.2
- Communication Interface: USB/RS232/RS485/WIFI/DRY-Contact
What's Included?
- 1 x SP6548 Sungold Inverter unit
- 1 x User Manual
- 1 x Software CD
- 1 x RS-232 cable
- 1 x Parallel communication cable
- 1 x Current sharing cable
- 1 x DC Fuse
- 4 x Cable gland
- 2 x PV connectors set
Still Have Questions? Give us a call today 1-877-242-2792
Shipping Times | Estimated delivery time to your door for in-stock orders placed today is 5-10 business days. |
Shipments & Lead Times:
We process all orders within 72 hours. From there, we do our best to ship as quickly as possible. Shipping times vary depending on the product and size of your order. We will send you your tracking information to the e-mail and/or phone number on file.
With the incredible demand for solar products, our average delivery time to your door is between 7-10 business days from date of order. However, for some products, shipping can be as fast as 3-5 business days to your door. Please check specific product pages for the most accurate information.
*Please Note* - As a large retailer, our stock levels are healthy and shipments are moving quickly. If you place an order for something that is not in stock, or is on backorder, our team will reach out to you within 24-72 hours of placing your order to determine how you would like to move forward.
If you have any questions, give us a call at 877-242-2792 or reach out via email / live chat.
Excellent Inverter!
Purchased this inverter to use in our new Ram Promaster van build. The package arrived intact, on time and damage free. We bought this for the heavy 4000-watt capability. Our build includes a hot water heater, an induction stovetop, a microwave convection oven and a 110V refrigerator as well as various outlets. This has the capability to use a shore power plug in as well which is a great asset. Love the remote on/off switch which has the LED indications as well. Would recommend this product for the heavy users!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Well built unit! High Quality
Quality control so far is superior to most inverters on the market. Still in my own testing phase. Originally bought this for a truck camper project. But my home grid-tie with battery backup is 26 years old. (16KW) the 20 year AGM 24vdc battery cluster is now 22 years old. (I am on borrowed time) i had originally had 4kw one Trace SW4024 120 vac inverter. The AGM battery pack consisted of twelve 2 volt 1460 AH cells. They are 250 ft. From my house. (In a shielded steel building with the old inverters, solar charge controllers, wind turbine controllers etc. So this a backup to that. NEC requires ground connection and neutral to be connected at the first main circuit breaker panel. This split phase inverter says Do not connect output neutral to input neutral. Yes I tested the open voltage between input neutral and output neutral 33 vac exists between these two points. I tested with a 150 watt 120 volt conventional light bulb between both neutral and output neutral to ground .03vac. (not a problem) The low cost way around this is to isolate your main panel (now it is a sub-panel) and add a new main basic panal.
Highly recommend!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Well built unit! Quality is in par with Trace inverters.
Quality control so far is superior to most inverters on the market. Still in my own testing phase. Originally bought this for a truck camper project. But my home grid-tie with battery backup is 26 years old. (16KW) the 20 year AGM 24vdc battery cluster is now 22 years old. (I am on borrowed time) i had originally had 4kw one Trace SW4024 120 vac inverter. The AGM battery pack consisted of twelve 2 volt 1460 AH cells. They are 250 ft. From my house. (In a shielded steel building with the old inverters, solar charge controllers, wind turbine controllers etc. So this a backup to that. NEC requires ground connection and neutral to be connected at the first main circuit breaker panel. This split phase inverter says Do not connect output neutral to input neutral. Yes I tested the open voltage between input neutral and output neutral 33 vac exists between these two points. I tested with a 150 watt 120 volt conventional light bulb between both neutral and output neutral to ground .03vac. (not a problem) The low cost way around this is to isolate your main panel (now it is a sub-panel) and add a new main basic panal.
High recommend!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Works as advertised
Tested for several days and works as expected. Working on final installation. Planning on buying a second unit to power all of my 120 loads. highly recommend!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Product Description
- Solar Inverter: 6.5KW DC 48V pure sine wave AC output 120V, Built-in MPPT solar charger max 120A and utility battery charger max 120A, Max PV input 390V (Voc) ,Dual PV input. ETL Listed to UL 1741 / CSA/ FCC
- Parallel Kit: parallel support up to 6 units, 120V single phase (1 unit ),120V/240V Split Phase capable (2 unit parallel),208V 3-Phase Support (3 unit parallel)
- WIFI Model : Built-in WIFI transmitter,Enable inverter data to be transmitted via WIFI to user's iphone or android smartphone, app can be downloaded from apple or android store
- Batteryless support: the inverter can power the loads from PV array / ac grid without battery connected
- LCD operation: Detachable LCD control module with multiple communication ports for BMS (RS485, CAN-BUS, RS232)
Main Features:
- 6500W Pure Sine Wave 120V Output
- Parallel up to 6 units (built-in parallel kits)
- 120V/240V Split Phase capable (2 unit parallel)
- 208V 3-Phase Support (3 unit parallel)
- Max solar charging 120A MPPT and AC charging 120A
- Built-in Wi-Fi for mobile monitoring
- Work with 48V Lead-acid/Lithium/User-defined/Batteryless
- Pylontech/Weco/Soltaro BMS Support
- Built-in genset starter dry contact
- FREE monitoring software
- ETL Listed to UL 1741/CSA/FCC
WiFi Monitoring
Built in WIFI transmitter is available on the SP6548 inverters allowing user quick and easy access to inverter data on mobile phone. Download app from Apple or Android store.
Support USB On-The-Go Function
It supports USB On-The-Go function to facilitate data upload/download.
User-friendly LCD Operation
Users can easily set up or change the charging current, output source and charger source prioritization through LCD control panel to optimize inverter performance.
Parallel Support
This model supports parallel operation up to 6 units, in Single Phase, Split Phase, or 3 Phase configuration, Parallel kits are built-in.
Batteryless Support
This model allows batteryless operation and therefore battery is optional. PV or grid alone to power load is now possible, if desired.
Specifications
- Model: BluePower SP6548
- Rated Power: 6500W
- Parallel: Yes, 6 units
Input
- Voltage: 120V
- Selectable Voltage Range: 90-140 VAC/80-140 VAC
- Frequency Range: 50/60HZ (Auto-Sensing)
Output
- AC Voltage Regulation: 120V AC +- 5%
- Surge Power: 12000VA
- Efficiency: 93%
- Transfer time: 20ms
- Perform: Pure Sine Wave
- Idle Power Consumption: < 70W
Battery
- Battery Voltage: 48V DC
- Low DC Cut-off Voltage: Self-defined from 42-48Vdc
- Bulk Charging Voltage: Self-defined from 48V-62V
- Overcharge Protection: 66 VDC
Solar Charger & AC Charger
- Solar Charger Type: MPPT
- Maximum PV Array Power: 8000W (2 x 4000W)
- MPTT Operation Voltage: 90-350VDC
- Maximum PV Array Open Circuit Voltage: 390VDC
- Maximum Solar Charge Current: 120A
- Maximum AC Charge Current: 120A
- Maximum Charge Current: 120A
Physical
- Size D X W X H (inch): 5.91 x 16.93 x 23.62
- Net Weight (lb): 43.2
- Communication Interface: USB/RS232/RS485/WIFI/DRY-Contact
What's Included?
- 1 x SP6548 Sungold Inverter unit
- 1 x User Manual
- 1 x Software CD
- 1 x RS-232 cable
- 1 x Parallel communication cable
- 1 x Current sharing cable
- 1 x DC Fuse
- 4 x Cable gland
- 2 x PV connectors set
Still Have Questions? Give us a call today 1-877-242-2792
Shipping & Delivery
Shipping Times | Estimated delivery time to your door for in-stock orders placed today is 5-10 business days. |
Shipments & Lead Times:
We process all orders within 72 hours. From there, we do our best to ship as quickly as possible. Shipping times vary depending on the product and size of your order. We will send you your tracking information to the e-mail and/or phone number on file.
With the incredible demand for solar products, our average delivery time to your door is between 7-10 business days from date of order. However, for some products, shipping can be as fast as 3-5 business days to your door. Please check specific product pages for the most accurate information.
*Please Note* - As a large retailer, our stock levels are healthy and shipments are moving quickly. If you place an order for something that is not in stock, or is on backorder, our team will reach out to you within 24-72 hours of placing your order to determine how you would like to move forward.
If you have any questions, give us a call at 877-242-2792 or reach out via email / live chat.
Customer Reviews
Excellent Inverter!
Purchased this inverter to use in our new Ram Promaster van build. The package arrived intact, on time and damage free. We bought this for the heavy 4000-watt capability. Our build includes a hot water heater, an induction stovetop, a microwave convection oven and a 110V refrigerator as well as various outlets. This has the capability to use a shore power plug in as well which is a great asset. Love the remote on/off switch which has the LED indications as well. Would recommend this product for the heavy users!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Well built unit! High Quality
Quality control so far is superior to most inverters on the market. Still in my own testing phase. Originally bought this for a truck camper project. But my home grid-tie with battery backup is 26 years old. (16KW) the 20 year AGM 24vdc battery cluster is now 22 years old. (I am on borrowed time) i had originally had 4kw one Trace SW4024 120 vac inverter. The AGM battery pack consisted of twelve 2 volt 1460 AH cells. They are 250 ft. From my house. (In a shielded steel building with the old inverters, solar charge controllers, wind turbine controllers etc. So this a backup to that. NEC requires ground connection and neutral to be connected at the first main circuit breaker panel. This split phase inverter says Do not connect output neutral to input neutral. Yes I tested the open voltage between input neutral and output neutral 33 vac exists between these two points. I tested with a 150 watt 120 volt conventional light bulb between both neutral and output neutral to ground .03vac. (not a problem) The low cost way around this is to isolate your main panel (now it is a sub-panel) and add a new main basic panal.
Highly recommend!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Well built unit! Quality is in par with Trace inverters.
Quality control so far is superior to most inverters on the market. Still in my own testing phase. Originally bought this for a truck camper project. But my home grid-tie with battery backup is 26 years old. (16KW) the 20 year AGM 24vdc battery cluster is now 22 years old. (I am on borrowed time) i had originally had 4kw one Trace SW4024 120 vac inverter. The AGM battery pack consisted of twelve 2 volt 1460 AH cells. They are 250 ft. From my house. (In a shielded steel building with the old inverters, solar charge controllers, wind turbine controllers etc. So this a backup to that. NEC requires ground connection and neutral to be connected at the first main circuit breaker panel. This split phase inverter says Do not connect output neutral to input neutral. Yes I tested the open voltage between input neutral and output neutral 33 vac exists between these two points. I tested with a 150 watt 120 volt conventional light bulb between both neutral and output neutral to ground .03vac. (not a problem) The low cost way around this is to isolate your main panel (now it is a sub-panel) and add a new main basic panal.
High recommend!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|
Works as advertised
Tested for several days and works as expected. Working on final installation. Planning on buying a second unit to power all of my 120 loads. highly recommend!
Quality |
Rated 5 out of 5
|
---|---|
Easy to Use |
Rated 5 out of 5
|

Select Cable Length (Ft.)
![MaxOak Bluetti EB240 2,400wH + 4 x 100W 12V Mono Solar Panels | [Solar Panel Add-On Only] - ShopSolarKits.com](http://cdn.shopify.com/s/files/1/0034/8913/6751/products/Generatornotincluded_400x.png?v=1657716862)
Power Station Model:
![EcoFlow DELTA MAX 2,400W / 2,016wH [Quad Kit] + 4 x 12V Mono Solar Panels | Complete Solar Kit - ShopSolarKits.com](http://cdn.shopify.com/s/files/1/0034/8913/6751/products/EcoFlowDELTAMAX2_400W2_016wH_QuadKit_4x12VMonoSolarPanelsCompleteSolarKit_400x.jpg?v=1658362076)
Type of Solar Panels:

Choose Panel Wattage (Minimum Order Quantity 6+):