AIMS 1500 Watt Pure Sine Inverter Charger 12V PICOGLF15W12V120V + Free Shipping
This heavy-duty, ETL listed to UL 458 standards inverter charger is ready to go wherever and whenever you need it. You can use this aims inverter for any application that uses 110 or 120 volts of alternating current.
You'll love your 1500 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch for small-sized industrial applications that depend upon power being available even under heavy load.
This power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home.
4,500 Watt Surge & Dual GFCI
It's capable of a 4500 watt surge for 20 seconds and can run at 1500 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection.
With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.
Features:
- Listed to UL 458 Standards and CSA 22.2 No 107.1
- 1500 watt low frequency inverter
- 4500 watt surge for 20 seconds -3x surge capability
- Battery Priority Selector
- Terminal Block
- GFCI - 20amps
- Marine Coated and Protected
- Multi Stage Smart charger 50 Amp
- Remote panel available
- Auto gen start
- Auto frequency
- 10msec typical transfer time
- 7 battery type settings for charger
- Selectable 25W power save mode (hibernation)
Inverter Output Specifications:
- Listed to UL 458 Standards
- Continuous Output Power: 1500 Watts
- Surge Rating: 4500 Watts (20 Seconds)
- Output Waveform: Pure Sine/Same as input (Bypass Mode)
- Output Voltage: 100-110-120Vac
- Nominal Efficiency: >92% (Peak)
- Line Mode Efficiency: >95%
- Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
- bypass terminal breaker - 20 amps
- Typical Transfer Time: 10ms (max)
- THD: < 10% DC
Input Specifications:
- Nominal Input Voltage: 12.0Vdc
- Minimum Start Voltage: 10.0Vdc
- Low Battery Alarm: 10.5Vdc-11.0Vdc
- Low battery Trip: 10.0Vdc-10.5Vdc
- High Voltage Alarm: 16.0Vdc
- Low battery Voltage Restart: 13.0Vdc
- Idle Consumption: 13.5 watts
- Charger breaker - 20 amps
- Power Saver Mode Idle Consumption: 8 watts
Charger Specifications:
- Output voltage: Depends on battery Type
- Charger Rate: 50A
Dimensions:
- Unit Weight: 38 lbs.
- Unit Size L x W x H: 15.35 x 11 x 7 inches
- Shipping Weight: 46 lbs.
- Shipping L x W x H: 20.5 X 13.8 X 12.2 inches
