Complete DIY Solar Panel Kit - 1,200 Watts Solar + 3,000W Pure Sine Inverter / Charger 120V Output | 24VDC | [DIY-10]

Looking for a complete DIY (do-it-yourself) solar panel kit that includes more than just the solar panels and charge controller? Are you looking for a solar kit that has everything you need, including the batteries, fuses, power inverter, inverter cables, battery cables - essentially the whole kit and caboodle? Well look no further! DIY-10 is one of the best selling solar kits available today.

Your solar kit includes a 3,000W inverter/charger capable of both powering your appliances AND charging your batteries from AC shore/grid power if and when needed. Along with 6 x powerful 200W monocrystalline solar panels backed by a 25-Year power output warranty.

We're on a mission to make solar simple which is why we created our custom DIY solar kits. Simply choose your battery bank type and size and we'll send you everything you need to get up and running with off-grid solar power. 

What's Included with Your [DIY-10] Solar Kit Order?

• Ships from USA!
• 1 x 3,000W 12V Pure Sine Inverter / Charger - 120V Output - 2-Year Warranty
• 6 x 200 Watt Monocrystalline Solar Panels 12V - 25-Year Power Output Warranty
• 4 x 12V Batteries - Choice of AGM (5-Year Warranty) or Lithium Batteries (10-Year Warranty)
• 1 x 60A MPPT Solar Charge Controller
• 1 x 10AWG Solar Extension Cables PV, approx. 50ft, SET
• 1 x 4AWG Inverter Cable, approx. 3ft, SET
• 1 x 4AWG Inverter Cable, approx. 1ft, RED
• 1 x 4/0AWG Inverter Cable, approx. 3ft, SET
• 1 x 4/0AWG Inverter Cable, approx. 1ft, RED
• 1 x 4/0AWG Inverter Cable, approx. 2ft, SET
• 2 x 1/0AWG Inverter Cable, approx. 1ft, RED
• Fuse and Fuse Holders
• 1 x 15A inline fuse kit, MC4
• 6 x Solar Panel Z-Brackets
• Free System Schematic / Wiring Diagram
• FREE SHIPPING!
• Lifetime Customer Support (Phone, Email, Live Chat)

What this kit can actually power (with 4 x 100ah AGM Batteries)? 

DIY-10 comes standard with 4 x 100ah AGM batteries giving you 200ah of useable battery capacity. This equates to rough 2.4kWh of useable battery bank on top of the 1,200 watts of solar panels that will be generating an additional 1.2kw of power per hour while the sun is shining. 

If we assume there's roughly 6 good sun hours in most states, the solar panels will produce around 7.2kw of power each day (or 216kw/month).

We really only need 15-18 hours of battery bank storage in order to get us through the night and to when the sun comes back up the next day, so anything over and above this would be considered backup for cloudy days.

You can double these run times with 4 x 100AH Lithium batteries!

DIY-10 is perfect for small off-grid cabins, home backup, or as a mid size RV system / mobile business applications.

Your Estimated Run Times Based on Appliances:

You can double these run times if you upgrade to 100ah LiFePO4 batteries. The run times also assume no sun to recharge the batteries during the day. This is how long your battery bank could sustain each appliance before running out.

Backed By Lifetime Customer Support

Every kit comes with it's own wiring diagram and user manuals for all the parts and pieces PLUS all of our kits are backed by lifetime customer support. This kit [DIY-10] comes with 6 x 200 watt solar panels, 1 x 60A MPPT charge controller, 4 x 100ah AGM batteries and a 3,000W pure sine wave power inverter along with all of the wiring, fuses and all of the other necessary  accessories.

200W [Solar Panels] Features:

• 12V off-grid solar panel.
• 0~+5W guaranteed positive power output.
• IP 65 or IP 67 rated.
• Built with strong tempered glass and aluminum frame.
• Certified to withstand challenging environmental conditions.
• Excellent low light performance on cloudy days, mornings and evenings.

Installation

• Easy installation and handling for various applications.
• Pre-drilled holes compatible with ground mounts, Z-brackets, pole mounts and tilt mounts.
• Compatible with on-grid and off-grid inverters.

Warranty

• 25 years 80% output power.
• 5 years materials and workmanship.

Built-in Components

• RICH SOLAR 100 Watt Monocrystalline Solar Panel 
• Panel Leads (Pair): 12AWG, 3FT each
• IP65 Rated waterproof junction box 
• IP67 Rated waterproof solar connectors

Specifications

• Maximum Power(Pmax): 200W
• Maximum Power Voltage(Vmp): 20.4V
• Maximum Power Current(Imp): 9.80A
• Open Circuit Voltage(Voc): 24.3V
• Short Circuit Current(Isc): 10.2A
• Weight: 26.5 lbs
• Dimensions: 58.7 x 26.8 x 1.4 in
• Warranty: 25 years output warranty

[Charge Controller] 60A MPPT Features:

• MPPT technology: Maximum Power Point Tracking produces maximum available power from PV array to battery bank utilizing peak power of the I-V curve
• Quality heatsink cooling – no fans needed and no thermal derating
• Battery type selector and user defined charging voltage
• 4 stage charging
• PV input, battery output and load control ports
• Stackable
• Reliable electronics, over engineered components generating less heat
• Very efficient up to 99%
• Low self consumption
• Thermal design rugged case
• Over temp protection
• Overload, short circuit, high and low voltage protection
• RS485 port for computer monitoring
• CE, ETL to UL1741 and RoHS compliant
• Marine coated
• Mounting holes

3,000W Pure Sine Wave 24V [Inverter/Charger] Features:

• 3000 watt low frequency inverter
• 9000 watt surge for 20 seconds -3x surge capability
• Battery priority selector
• AC direct connect terminal block
• GFCI
• Marine coated and protected
• Multi stage smart charger 40 Amp for gel, AGM, lead and lithium LiFePO4
• Remote panel available
• Auto frequency
• 10msec typical transfer time
• Optional 25W power save mode
• 7 battery type settings for charger
• Selectable 25W power save mode (hibernation)
• Automatic transfer switch

Inverter Output Specifications:

• Continuous Output Power: 3000 Watts
• Surge Rating: 9000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Nominal Efficiency: >88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: < 10% DC
• Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications

• Nominal Input Voltage: 24.0Vdc
• Minimum Start Voltage: 20.0Vdc
• Low Battery Alarm: 21.0Vdc-22.0Vdc
• Low Battery Trip: 20.0Vdc-21.0Vdc
• High Voltage Alarm: 32.0Vdc
• Low Battery Voltage Restart: 26.6Vdc
• Idle Consumption: 46.5 Watts
• Power Saver Mode Idle Consumption: 18.9 Watts

Charger Specifications

• Output Voltage: Depends on battery Type
• Charger Rate: 40A

Dimensions

• Unit Weight: 56 lbs.
• Unit Size L x W x H: 16.48 x 8.74 x 7.1 inches
• Shipping Weight: 64 lbs.
• Shipping L x W x H 23.5 x 13.0 x 12.5 inches

AGM Battery Bank Options [100Ah]:

Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding. Not restricted for air transport complies with IATA/ICAO Special Provision A67. UL-recognized component.

• Heavy duty compared to other AGM batteries - 20% more cycles 
• Mount in any orientation.
• Computer designed lead calcium tin alloy grid for high power density
• AGM is ideal for back up and stored power applications
• Convenient removeable carry handle
• Thick plates within the battery to limit fluid expansion during freezing
• Long service life float or cyclic applications
• Maintenance-free operation
• Low self discharge
• Copper terminals

AGM Battery Specs:

• Operating Temperature Range
• Discharge -20~60oC
• Charge -10~60oC
• Storage -20~60oC
• Max. Discharge Current 77oF(25oC) 900A(5s)
• Short Circuit Current 2100A
• Charge Methods: Constant Voltage Charge 77oF(25oC)
• Cycle use 14.4-14.7V
• Maximum charging current 30A
• Temperature compensation -30mV/oC
• Standby use 13.6-13.8V

100Ah AGM Battery Size:

• 13L x 8.74H x 6.75W
• Weight(lbs) 70.5
• 5 year warranty 
• Useable Capacity (in watt hours): 600wH

100Ah LiFePO4 Battery Option:

These 100AH lithium batteries have a much longer cycle life capacity, and is easier to maintain compared to other battery technologies. The LiFePO4 technology has better thermal and chemical stability, which improves battery safety and packed with power in a small and lightweight footprint.

100AH LiFePO4 Features:

• Extremely high number of charge/discharge cycles
• > 10 Year lifespan with proper maintenance
• Built-in smart battery management system
• Wide operating temperature range
• Unsurpassed high temperature performance
• Green energy without metal contaminant
• Low maintenance
• High amp capacity
• Stable output voltage
• Little self-discharge
• Lifetime customer support
• Over charging or discharging protection.
• Over current & short circuit protection.
• High & low temperature disconnects
• Charge Voltage: 14.6V
• Max Charge Current: 50 A
• Max Discharge Current: 100 A
• Battery Dimensions: 12.8″L x 6.6″W x 8.5″H
• Weight: 21.8 lb
• Connect in series for 24V or 36V or 48V Battery Bank, or Connect in Parallel for Larger Capacity

BMS Safety Protection

• Each cell is fused and if for some unlikely situation a cell fails, this design will isolate the cell stopping any other damage and allows the battery to function safely
• Convenient removable carry handle
• Lightweight
• Short circuit protected
• Physical damage to battery case will not cause fire
• Excessive thermal exposure will not cause a fire
• Able to withstand over-charge/over-discharge without damage to the battery
• Sophisticated Battery Management System (BMS)

RICH 100Ah LiFePO4 Specs:

Electrical Specifications

• Nominal Voltage: 12.8V
• Nominal Capacity(at .5C, 77°F): 100Ah
• Minimum Capacity (at .5C, 77°F): 95Ah
• Expected Cycle Life: >5000 cycles w/1C charge and discharge rate, at 77°F, 80% DOD

Operating Specifications

• Charge Method: Smart charger, constant current, constant voltage
• Operating Voltage: 12.8 V
• Capacity: 100 Ah
• Energy: 1280 Watt Hours
• Charge Voltage Range (Max 14.6V): 14.4 -14.6V
• Continuous Charge Current: 50A
• Continuous Discharge Current: 100A
• Over Voltage Shutdown: 15.6 +/-0.2V
• Discharge Cut-off Voltage: 8V =/- 0.5V
• Self Discharge (stored at 50% SOC): < 3%/month
• Waterproof: IP65

Temperature Performance

• Charge Temperature: 32° F to 140° F
• Discharge Temperature: -4° F to 140° F
• Storage Temperature: -4° F to 140° F
• BMS High Temperature Cut-off: 149°F
• BMS Low Temperature Cut-off: 32°F

Physical Specifications

• Battery Dimensions: 12.8″L x 6.6″W x 8.5″H
• Weight: 21.8 lb
• Group Size: 31
• Battery post size: 5/16″

BMS Operation

Over Charge Protection

• Over charge detection voltage: 3.9 +/- 0.05V
• Over charge detection delay time: 0.96 – 1.4s
• Over charge release voltage: 3.80 +/-0.05V
• Maximum charge voltage: 3.65 +/-0.05V

Over Discharge Protection

• Over discharge detection voltage: 2.0V +/- 0.05V
• Over discharge detection delay time: 115-173ms
• Over discharge release voltage: 2.3V +/- 0.10V
• Over Current Protection Over current detection delay time: 9 +/- 2ms
• Over current release condition: Cut load

Polarity Reverse Protection: Yes
Short Circuit Protection: Yes

Warranty: 10-Years

We include all of the necessary solar panel, charge controller, battery and inverter cables necessary for safe and proper installation. We also include extra safety accessories such as fuses, entry glands and inline holders. 

Free Shipping & FREE Lifetime Customer Support

Still have questions? Don't hesitate to reach out or give us a call today at 877-242-2792