ShopSolar is now offering a complete site assessment and post-purchase electrical installation quote.

How it works:

After you purchase your solar kit, we will send out a technician to review the installation of your solar panels, as well as the electrical condition of the property, at which point they will be able to provide a complete assessment and quote for completing the electrical portion of your install.

Our technicians will follow the scope of work details outlined below:

Installation Assessment - Scope of Work

1. Check in with site host *
2. Confirm Building Permit is onsite and accessible *
3. Confirm Construction Drawings are onsite and accessible *
4. Does a new Home Improvement Contract (HIC) need to be filed to complete the Installation *
5. Confirm PV system size *
6. Confirm PV Inverter/ Microinverter manufacturer *
7. Confirm quantity of PV modules *
8. Confirm PV Module model number *
9. Confirm if Battery Energy Storage System (BESS) is included in scope of work *
10. Confirm BESS manufacturer
11. Provide photo of the front of the home from the street *
12. Provide photo of the Utility meter *
13. Provide photo of the main electrical service *
14. Provide photo of Point of Interconnection with front on (showing labelling and breaker amp rating) *
15. Provide photo of Point of Interconnection with front off (showing conductor terminations) *
16. Provide photo of PV Grounding Electrode Conductor connection and termination *
17. Confirm PV/ BESS equipment location (e.g. accessible outside location, inaccessible inside location) *
18. Provide pullback photo of PV Balance of system (e.g. PV Meter/ enclosure, Disconnects, PV Combiner Panel
19. Provide photo of Inverter/ Enphase nameplate showing nameplate data (e.g. size of equipment, serial number, etc.) *
20. Provide photo of Inverter/ Enphase wire terminations *
21. Provide photo of Enphase Envoy serial number and MAC ID (if applicable)
22. Provide photo of PV Meter (if applicable)
23. Is the monitoring system cellular, WiFi, or hardwired into the Customer’s Internet Service Provider *
24. Provide photo of BESS (if applicable)
25. Provide photo of the BESS nameplate data (if applicable)
26. Provide photo of internal BESS conductor terminations (if applicable)
27. Provide photo of BESS Communications cabling and terminations (if applicable)
28. Provide photo of conduit placement *
29. What type of conduit was used (e.g. PVC, EMT, Flex, etc.) *
30. Provide photo of junction boxes/ condolets *
31. Weep holes drilled *
32. Provide photo of current roof condition *
33. Grounding /bonding installed per NEC code *
34. All PV modules installed per scope of work *
35. Any PV modules missing *
36. All microinverters/ optimizers installed per scope of work *
37. Are there any missing microinverters/ optimizers *
38. Provide photo of roof junction box (lid off showing terminations and weep holes drilled) *
39. Photo of under module wiring (identify any possible unsecured conductors, pest issues, etc.) *
40. Is the PV system complete and ready for inspection *
41. Are there stored materials on site for the system *
42. Photo of stored materials and location (If applicable)
43. Are there any damaged materials due to being stored (If applicable)
44. Identify materials needing procurement prior to returning to site (If applicable)
45. Additional Notes (If applicable)
46. Check out with Site Host